top of page
To order contact me at: petemarken@gmail.com
If you do not see a reply within 24 hours please check your spam or junk email folders.
20191231_200740.jpg

Wedgie-Less Segmenting Sled:

CNC machined from 3/4" phenolic coated baltic birch ply. It will cut 10, 12, 16, 20, 24, 36, 48, 72 and 144 segment rings.

Cost $185 plus shipping and tax if required.

20210318_164937_edited.jpg

Hybrid segmenting sled:
CNC machined from 18mm baltic birch plywood.
the sled ca be used with either preset index pins for 10, 12, 16, 20, 24, 36, 48, 72 or 144 segments or it can be used with the SEGEASY wedgies from Jerry Bennett. The sled is laser engraved. In order to keep the price reasonable the sled is shipped unfinished. To protect the engraving it should be finished with a couple coats of polyurethane. Cost is $160 plus shipping and tax if required.

20191231_193532.jpg

Sled shown with optional cutoff table. The table has a measuring stop block that is set to the same angle as the sled for precise cutoff lengths. It includes a fine adjustment knob. Cost: $175 plus shipping and Tax if required. Does Not Include Sled.

20191231_184519.jpg

This is a 72 segment ring cut on the wedgie-less sled.

20190211_205449.jpg

This is a 48 segment test ring cut on the wedgie-less sled

Open Segmenting Sled.jpg

Open Segment Sled:

14" X 14" CNC machined from baltic birch plywood. Includes UHMW miter track runner with 8-32 adjusting screws. The sled is lightly sanded and unfinished. There are index pins for preset angles to work with the Segeasy open segment plates. Can also be used for closed segment rings by not using index pins and using Segeasy wedgies.

Price: $160 plus tax and shipping

Wedgie Sled.jpg

Wedgie Sled:

14" X 14" CNC machined from 3/4" baltic birch plywood. Includes UHMW miter track runner with 8-32 adjusting screws. The sled is lightly sanded and unfinished. Wedgies not included

Price: $110 plus tax and shipping

Wedgie Sled-3.jpg

Cutoff Table: Does not include sled.

15" X 18" CNC machined from 3/4" baltic birch plywood. Includes UHMW miter track runner with adjusting screws. The table includes a measuring stop block with fine adjustment, The stop block is set to the same angle as the sled fence for accurate segment edge length. Lightly sanded and unfinished.

Price: $150 plus tax and shipping

bottom of page