Wedgie-Less Segmenting Sled:

CNC machined from 3/4" phenolic coated baltic birch ply. It will cut 10, 12, 16, 20, 24, 36, 48 and 72 segment rings.

Cost $150 plus shipping and tax if required.

Sled shown with optional cutoff table. The table has a measuring stop block that is set to the same angle as the sled for precise cutoff lengths. It includes a fine adjustment knob. Cost: $140 plus shipping and Tax if required.

This is a 48 segment test ring cut on the wedgie-less sled

Wedgie Sled:

11-3/4" X 14" CNC machined from 3/4" baltic birch plywood. Includes UHMW miter track runner with 8-32 adjusting screws. The sled is lightly sanded and unfinished. Wedgies not included

Price: $85 plus tax and shipping

Cutoff Table:

15" X 18" CNC machined from 3/4" baltic birch plywood. Includes UHMW miter track runner with adjusting screws. The table includes a measuring stop block with fine adjustment, The stop block is set to the same angle as the sled fence for accurate segment edge length. Lightly sanded and unfinished.

Price: $95 plus tax and shipping